Canon Service Tool V6000 [updated] May 2026

The Canon Service Tool v6000 (often stylized as ST V6000) is a specialized Windows-based utility used primarily for maintenance tasks on Canon PIXMA, MAXIFY, and G-series (MegaTank) printers. It is commonly used when a printer enters a "Service Mode" state due to internal errors or maintenance requirements. Core Features

Waste Ink Absorber Reset: Its most frequent use is resetting the waste ink counter (often associated with Error Code 5B00 or 1700), which signals that the internal ink pads are "full".

EEPROM Information: Allows users to read and save EEPROM data, providing a detailed history of the printer, including total page counts and error logs.

Print Head Cleaning: Initiates deep cleaning cycles or "ink flushing" (for MegaTank models) to clear air bubbles or severe clogs in the print head.

Test Prints: Executes service-level test patterns that verify nozzle health and alignment more thoroughly than standard consumer drivers.

Region Settings: Can be used to change or verify the region code of the printer. Requirements & Usage

To use the tool, the printer must first be placed into Service Mode manually. While steps vary by model, a common method involves: Turning off the printer. Holding the Stop button, then holding the Power button. canon service tool v6000

While holding Power, releasing and pressing the Stop button 5 times (or 6 for some G-series models).

Releasing both buttons; a solid green light indicates successful entry. Critical Precautions

Official Availability: This is a service-only tool not typically distributed on Canon’s official support site for consumers. Most versions found online are third-party mirrors.

Error 006: Attempting to use the software while the printer is NOT in Service Mode, or using an incompatible version, often triggers an "Error 006".

Hardware Maintenance: Resetting a waste ink counter without physically cleaning or replacing the ink absorber pads can lead to actual ink leakage.

The Canon Service Tool V6000 is an essential software utility designed for technical specialists and advanced users to perform maintenance and adjustments on Canon inkjet printers. Its primary function is resetting the "Waste Ink Pad" or "Ink Absorber" counter, which resolves critical errors like Support Code 5B00 or 5B02 that prevent the printer from operating. Key Features and Capabilities The Canon Service Tool v6000 (often stylized as

The V6000 version is a powerful update that supports a vast range of modern and legacy Canon models.

Waste Ink Reset: Clears the internal counter for the ink absorber (errors 5B00, 5B02, 1700).

Diagnostic Tools: Allows users to print EEPROM information to check the printer’s health and usage history.

Print Head Maintenance: Facilitates deep cleaning and initialization of the print head.

Region Settings: Enables technical adjustments such as setting or changing the printer's regional configuration. Supported Printer Models

The Canon Service Tool V6000 is compatible with many popular series, including: Canon Service tool V6000 - PrinterFix Navigate to the Cleaning tab

B. Performing a Deep Clean

  1. Navigate to the Cleaning tab.
  2. Select Deep Cleaning or Power Cleaning.
  3. Click Execute.
  4. Warning: This uses a massive amount of ink. Only do this if standard cleaning fails.

3. How to Enter Service Mode

You cannot use the V6000 tool while the printer is in its normal operating state. You must put it into "Service Mode."

Note: The exact button combination varies slightly by model, but the following is the standard procedure for most modern PIXMA printers:

  1. Turn the printer OFF.
  2. Unplug the power cable (wait 10 seconds) and plug it back in. (For some models, just leaving it off is enough).
  3. Press and hold the Stop/Reset button.
  4. While holding Stop/Reset, press the Power button once. Do not let go of Stop/Reset yet.
  5. Release the Stop/Reset button.
  6. Press the Stop/Reset button 5 times in quick succession.
  7. Release both buttons.
  8. The printer’s screen should go blank or display a "Service Mode" message, and the power LED will light up green.

1. What it is and typical use cases

  • Purpose: Reset internal counters (waste ink absorber counter), change EEPROM values, run service-mode tests and alignments, perform deep cleaning routines, and sometimes restore printers from error states that block normal operation.
  • Typical users: Repair technicians, power users, refurbishers who need to put printers back into working order after counter/full waste-ink pad errors or similar service-mode faults.
  • Distribution: Usually available from third-party enthusiast/repair forums and file-hosting sites rather than Canon’s official software channels.

4. Basic Operations (Using the Tool)

Note: The exact layout of V6000 depends on the specific build, but the core functions are located under the "Clear" or "Ink Absorber" tabs.

Recommended Sources:

  • Badcaps.net forums – Electronics repair community with verified uploads.
  • GitHub – Some users have uploaded clean copies (search “canon service tool v6000”).
  • YouTube repair channels – Check the description of videos from trusted repair technicians like “DIY Printer Repair” or “TechPirate.”

3. Physical Ink Leakage

Resetting the counter without replacing the waste ink pads is dangerous. The pads have a finite capacity. If you reset the counter and continue printing, the pads will eventually overflow, causing liquid ink to leak inside your printer, on your desk, or even onto your walls and floor.

Key Features of the V6000

While its primary job is resetting waste ink counters, the Canon Service Tool V6000 offers several other advanced functions:

  1. Waste Ink Counter Reset (EEPROM Reset): Clears the absorber counter for both the main pad and the platen pad.
  2. Ink Absorber Replacement Confirmation: Allows you to register that the physical pads have been changed (or to trick the printer into thinking they have).
  3. Print Head Deep Cleaning: Performs a more aggressive cleaning cycle than the standard driver utility.
  4. Ink Flow Testing: Tests the nozzle integrity and ink supply system.
  5. Region/Language Setting Changes: Some versions allow changing the printer's regional lock (use with extreme caution).
  6. Log Data Retrieval: Extracts service history and error logs from the printer’s memory.