Autodata 3.45 The Hardware Information Does Not Match With ^new^ Online

The error "The Hardware Information Does Not Match With..." in Autodata 3.45 typically occurs when the unique Hardware ID (UID) used to generate your license no longer matches the ID currently detected by the software. This is common after hardware changes, OS updates, or improper driver installation. Common Causes

Hardware Changes: Installing new RAM, a different hard drive, or changing network adapters can alter your PC's Hardware ID.

Emulator/Driver Failure: The Sentinel hardware key emulator or dongle drivers may be disabled or corrupted.

Incorrect UID Generation: Generating a UID on a 64-bit system without restarting properly often results in an incorrect "640000000" code. Steps to Resolve Verify Hardware ID (UID)

Navigate to the GetUid-x64 (or x32) folder in your installation directory.

Right-click the GetUid file and select Run as Administrator. Autodata 3.45 The Hardware Information Does Not Match With

Crucial for 64-bit: You must run the file, restart your PC, and then run it again to get the correct 10-digit code. If it shows "640000000," it is incorrect. Regenerate the License

Use the newly captured 10-digit (64-bit) or 8-digit (32-bit) code to generate a new .reg or .bat license file using your keygen.

Double-click the new license file to import the updated hardware information into your Windows Registry. Check Sentinel Drivers and Emulator Ensure the Sentinel Protection Installer is installed.

Open Device Manager and check for "Sentinel USB Keys" or "Universal Serial Bus controllers" with exclamation marks.

Restart the emulator by running the "Start Emulator" or "AuDaSO" tool as an Administrator. Adjust System Settings The error "The Hardware Information Does Not Match With

Regional Settings: Ensure your system locale is set to English (United States), as other formats can cause runtime and licensing errors.

Test Mode: Verify that Windows is in Test Mode (usually indicated by text in the bottom-right corner of the desktop). If not, re-enable it via the installation scripts.

For more detailed walkthroughs, you can refer to community-shared guides on Scribd or visual troubleshooting on YouTube.

Did you recently update your Windows version or change any hardware components before this error appeared? How Do I install My Dongle Drivers

1. Restore the Original Crack/Patch

• Reapply the AutoKeyGen.exe or Patch.exe that came with your Autodata 3.45 installation.
• Run as Administrator and follow the instructions to generate a new license file based on the current hardware.

Autodata 3.45 Error: “The Hardware Information Does Not Match With” – Causes, Fixes, and Prevention

Autodata has long been the gold standard for automotive technicians, workshop owners, and DIY mechanics. Its detailed technical specifications, wiring diagrams, diagnostic trouble codes (DTCs), and repair procedures are indispensable. However, like any sophisticated piece of software, it is prone to errors. One of the most notorious and frustrating messages encountered by users of version 3.45 is: Reapply the AutoKeyGen

“The hardware information does not match with…”

This cryptic error typically appears immediately after installation or when attempting to launch the application. It stops the software dead in its tracks, preventing access to critical repair data. If you are staring at this message right now, don’t panic. This article will dissect the error in detail, explain why it happens, and provide a step-by-step guide to resolve it.

4.4 Registry Corruption or Cleaner Tools

Registry cleaners (CCleaner, Wise Registry Cleaner) may delete the key: HKEY_LOCAL_MACHINE\SOFTWARE\Autodata\3.45\HWID If this key is missing, the software recalculates HWID and compares it to NULL → mismatch.

3. The Meaning of “Does Not Match With...”

The error appears when the currently calculated HWID differs from the HWID stored inside the license file (commonly license.dat, autodata.key, or embedded in Autodata.exe resources). There are three possible completions of the message:

• “...the registration data.” → The HWID stored in the registry (HKEY_LOCAL_MACHINE\SOFTWARE\Autodata\3.45) does not match.
• “...the license file.” → The HWID embedded in license.key or activation.dat differs.
• “...the original installation media.” → Rare; suggests modified executable checking against a hidden installation-time checksum.

2.2. You Transferred the Software to a New PC

If you had Autodata 3.45 installed on an old computer and then moved the hard drive or tried to reinstall it on a new machine without deactivating the license properly, the hardware mismatch will appear immediately.

4. If Using a Virtual Machine (VMware/VirtualBox)

• Ensure the VM’s network adapter type is set to NAT or Bridged (not Host-Only).
• Keep the VM’s MAC address fixed (do not generate a new one on each boot).
• Re-run the keygen inside the VM.

4. Root Causes of the Mismatch

2. Apply the Registry Fix

This is the critical step to bypass the hardware check on modern Windows.

1. Open the Start Menu, type Notepad, and open it.
2. Copy and paste the following code into the Notepad file:

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Autodata Limited\CDB3.5\Settings]
"Language"="English"
"InstallDir"="C:\\Autodata"
"CDROMDrive"="D:"
"CompetitionLogDir"="C:\\Autodata\\"
"DriversLogDir"="C:\\Autodata\\"
"Server"=dword:00000000
"ShowHardwareInfo"=dword:00000001

(Note: If you installed Autodata to a different folder or drive, edit the InstallDir and CDROMDrive lines accordingly.)

3. Go to File > Save As.
4. Name the file autodata_fix.reg.
5. Change "Save as type" to All Files.
6. Save it to your Desktop.
7. Double-click the autodata_fix.reg file you just created.
8. Click Yes when asked if you want to continue adding information to the Registry.