Skip to main content

Autocom 202023 Vm En By Fantomel Updated !free! · Secure & Pro

This release of Autocom 2020.23 is a popular pre-configured VMware (VM) image developed by

, a well-known contributor in the automotive diagnostic community. Key Features Plug-and-Play Setup

: This version is distributed as a Virtual Machine, meaning it is pre-installed and requires no complex activation or "keygen" steps—you simply load it into VMware Workstation and start working. Updated Database

: Provides diagnostic support for passenger cars and heavy-duty trucks from a wide range of manufacturers, covering models up to Enhanced Functionality

: Includes standard features like reading and clearing fault codes (

), viewing real-time sensor data, component activation, and service resets. Hardware Compatibility : It is designed to work with common interfaces like the Delphi DS150E Autocom CDP+ (both single and double board versions). Installation Highlights Virtualization Requirements : To run this VM, you must ensure Intel VT-x virtualization is enabled in your computer's BIOS. VMware Version : For best stability, it is recommended to use VMware Workstation 16 Pro

: While this version is safer than standalone installers, many antivirus programs may still flag files within the VM; temporary disabling during the initial file extraction is often recommended. Firmware Updates

: If the software prompts that the "VCI firmware is outdated," you can update the device's firmware directly through the software's settings, though this should be done with a stable power supply.

For the most reliable downloads and support, users often visit specialized forums like Garage Forum , where Fantomel typically shares his updated releases. in your BIOS or how to configure your VCI for the first time? autocom 202023 vm en by fantomel updated

To prepare the Autocom 2020.23 VM (Virtual Machine) by Fantomel, follow these specific steps to ensure successful setup and device communication: ⚙️ Initial Virtual Machine Setup

Software: Use VMware Workstation 12 or higher (Version 17 is recommended for newer Windows builds).

Open File: Navigate to the extracted folder and select the 2020.23.vmx file.

Move vs. Copy: When prompted by VMware, you MUST select "I Moved It". This preserves the pre-activated hardware ID within the VM. 🔌 Connecting Your VCI (Diagnostic Interface)

USB Connection: Connect your Autocom/Delphi adapter to your computer's USB port.

VM Assignment: In the VMware menu, go to VM > Removable Devices and select your interface (often listed as "Future Devices Autocom CDP+ USB") to "Connect (Disconnect from Host)". Software Configuration: Open Autocom within the VM. Go to Settings > Hardware Setup. Choose the USB/BT (Com-port) tab. Click Test; it should return "Test OK". ⬆️ Firmware & Performance Tips

Update Firmware: If the software prompts for an update, click Update in the Hardware Setup tab. This usually takes 2–3 minutes.

System Clock: If using a "Native" (non-VM) version, some variants require setting the system date to 15.12.2021 to bypass license errors. This release of Autocom 2020

Hardware: For the best results, use a single-board DS150E interface, as they generally support more protocols than double-board versions.

💡 Pro Tip: Always disable your host computer's antivirus or add the VM folder to the exclusion list, as many diagnostic "activators" are flagged as false positives. If you'd like more specific help, please share: Your VCI type (e.g., single-board or double-board)

Any specific error messages you're seeing (like "Valid license key" or "Communication error")

Based on the filename convention you provided (autocom 202023 vm en by fantomel), this refers to a specific release of Autocom / Delphi 2020.23 (often mislabeled as 2023 in casual forums or modified to bypass the 2020 version lock). "Fantomel" is a known repacker/cracker in the automotive diagnostics scene.

Since this is a "VM" (Virtual Machine) release, the installation process is different from a standard software installation. The software comes pre-installed inside a virtual environment (usually VirtualBox or VMware) to bypass the complex driver signing and security checks required by Windows 10/11.

Disclaimer: This guide is for educational purposes only. Using cracked automotive software carries risks, including malware, data theft, and potential damage to vehicle ECUs if the interface behaves unexpectedly. Always use official software for professional work.

Step 2: Install Virtualization Software

If you don’t have VMware or VirtualBox:

Install the software and restart your computer if necessary. Step 2: Install Virtualization Software If you don’t

System Requirements (Host Machine)

Release Spotlight: AutoCom 2020.23 VM (EN) – The "Fantomel" Update

Release ID: AutoCom 2020.23 VM EN Revision: Updated by Fantomel Classification: Advanced Automotive Diagnostics / Virtual Machine Image

Performance Compared to Modern Diagnostic Tools

How does Autocom 202023 stack up against 2025-era tools like Topdon, Launch X431, or Autel?

| Feature | Autocom 202023 | Modern Scan Tool (2024-2025) | |---------|----------------|-------------------------------| | Vehicle coverage | Up to ~2020 models | Up to current year | | Cloud updates | No (manual) | Yes (automatic) | | Bi-directional controls | Good (but limited on very new ECUs) | Excellent | | Coding/Programming | Basic coding only | Full ECU programming, online coding | | Cost | Free (if you have a compatible VCI) | $500 - $5000+ | | Learning curve | Moderate (simple UI) | Varies (some are complex) |

Verdict: For vehicles manufactured before 2018-2020, Autocom 202023 remains a powerhouse. For the latest electric vehicles or heavily encrypted 2024+ models, you will need a modern tool.

1. Vehicle Coverage

Step 4: Configuring USB Passthrough (The Critical Step)

The VM runs Windows internally, but it cannot see your physical Autocom/VCI interface until you "pass it through" to the virtual machine.

  1. Connect your Interface: Plug your Autocom VCI (Diagnostic Tool) into your PC via USB.
  2. Inside the VM Window:
    • Look at the menu bar at the top of the VirtualBox/VMware window.
    • Go to Devices -> USB.
    • Look for your device. It might be listed as "Autocom", "Delphi", "VCI", or sometimes a generic device name like "S12123".
    • Click it to attach it. (A checkmark should appear next to it).

Note: You may need to install the VCI drivers inside the VM if Fantomel didn't include them, but most VM releases come pre-installed with a Driver Signature Enforcement bypass.

Overview

The "AutoCom 2020.23 VM EN by Fantomel" release represents a significant pivot in the distribution of automotive diagnostic software. Moving away from traditional native installations that often conflict with operating system architectures or require complex activation protocols, this release virtualizes the AutoCom environment. This ensures a "plug-and-play" experience for technicians using standard Windows-based hardware, encapsulating the software in a stable, pre-configured Virtual Machine (VM) state.

Step 5: Power On and Connect