Aukey Pby37 Manual

Aukey PB-Y37 is a 20,000mAh portable power bank featuring 65W Power Delivery (PD) 3.0 and Quick Charge 3.0 technologies, designed to support high-performance devices like the MacBook Pro 13", Nintendo Switch, and iPads. Core Specifications Aukey PB-Y37 : 20,000mAh / 74Wh : USB-C Input (45W Max, 5-20V) USB-C Out 1 : 65W Max (PD 3.0) USB-C Out 2 : 18W Max (PD 3.0) : 18W Max (Quick Charge 3.0) Dimensions & Weight : 15.7 x 7.2 x 2.5 cm; 370g Operating Instructions Charging the Power Bank

: Connect a USB-C cable to the input port. A 45W PD charger can fully recharge the unit in approximately 2 hours. Charging Devices

: The unit typically senses connections automatically; however, if it doesn't start, press the power button once. Trickle/Low-Current Mode

: This mode is specifically for small devices like fitness trackers or wireless earbuds that draw very little power. To Activate : Press and hold the power button for 2 seconds. Indicators

: LED lights may cycle or flash to indicate this mode is active. LED Status Indicators

: The white LED flashes slowly while charging and stays solid when the unit is at 100%. Battery Level

: 1 light = 25%, 2 lights = 25–50%, 3 lights = 50–75%, 4 lights = 75–100%. Safety & Maintenance PB-Y37 20000mAh 65W PD Powerbank Fast Charge

Guide: AUKEY PBY37 Wireless Earbuds User Manual

Note: AUKEY product manuals can sometimes be brief or hard to locate. This guide is compiled from the standard operating procedures for the AUKEY EP-T31 / PBY37 model series.

2. What’s in the Box

Aukey PB-Y37 Power Bank
USB-A to USB-C charging cable (30cm/11.8 inches)
User manual
Travel pouch (varies by regional packaging)

8. Troubleshooting

Only one earbud works: Return both to the case, wait 10 seconds, and take them out simultaneously. If this fails, perform the Reset procedure above.
Low Volume: Check your phone volume first

Checking Battery Level: Press the power button once. The LED indicator will display the current status.

Charging Your Devices: Connect your device to one of the output ports. Charging typically starts automatically, but you may need to press the power button once to initiate the connection.

Low-Current Charging Mode: This mode is specifically for small electronics like fitness trackers or wireless headphones. To Enter: Double-press the power button.

Indicator: The LED indicator lights will typically flash sequentially while in this mode. To Exit: Double-press the power button again. Port Specifications & Performance

features three ports that can charge up to three devices simultaneously:

USB-C Output 1 (Primary): Supports Power Delivery (PD) 3.0 with a maximum output of 65W (20V 3.25A). This port is powerful enough to charge a MacBook Pro 13", Nintendo Switch, or iPad.

USB-C Output 2: Provides up to 18W–20W PD 3.0 output, ideal for fast-charging the latest smartphones.

USB-A Output: Features Quick Charge 3.0 technology for up to 18W output on compatible devices. What Is the Proper Way to Charge a Power Bank? - Aukey aukey pby37 manual

USB-C Output 1: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 3.25A (65W Max, PD 3.0) USB-C Output 2: 15V 3A, 3V 2A, 12V 1.5A (18W Max, PD 3.0)

USB-A Output: 5-6V 3A, 6-9V 2A, 9-12V 1.5A (18W Max Quick Charge 3.0) Dimensions: 15.7 x 7.2 x 2.5 cm Weight: 370g Getting Started

First Use: Fully charge the power bank before its first use. Charging the Power Bank:

Connect the included USB-C to C cable to a USB-C power source.

Fast Recharging: Using a 45W PD charger can fully recharge the power bank in approximately 2 hours. Charging Your Devices:

Connect your device to any of the three ports using a compatible cable.

The power bank will automatically start charging once connected. If it does not, press the Power Button once. Special Features Introduction Manual - Aukey

The AUKEY PB-Y37 is a 20,000mAh portable charger designed for high-performance power delivery, capable of outputting up to 65W to charge laptops like the MacBook Pro, as well as smartphones and tablets. Core Operations Guide

Initial Setup: It is recommended to fully charge the power bank before its first use. Charging the

: Connect a USB-C cable to the input port. Using a 45W Power Delivery (PD) charger, the device can reach a full charge in approximately 2 hours. Charging Your Devices:

Connect your device to one of the three ports (2x USB-C, 1x USB-A). Press the Power Button once to initiate charging.

Battery Status: The LED indicators show remaining power levels: 1 LED: 0% - 25% 2 LEDs: 25% - 50% 3 LEDs: 50% - 75% 4 LEDs: 75% - 100% Advanced Features

Low-Current Mode: Designed for delicate gadgets like fitness trackers or wireless earbuds. To activate, press and hold the power button for 2 seconds; the LEDs will flash sequentially to indicate this mode is active. High-Speed Ports: USB-C Output 1: Up to 65W Max (PD 3.0). USB-C Output 2: Up to 18W Max (PD 3.0). USB-A Output: Up to 18W Max (Quick Charge 3.0). Troubleshooting & Maintenance PB-Y37 20000mAh 65W PD Powerbank Fast Charge

Aukey PBY37 Wireless Bluetooth Earbuds Manual and Guide

Are you looking for the Aukey PBY37 manual? Look no further! This post provides a comprehensive guide to help you get started with your Aukey PBY37 wireless Bluetooth earbuds.

Table of Contents

Introduction
Package Contents
Design and Features
Charging the Earbuds
Pairing the Earbuds
Using the Earbuds
Troubleshooting
Specifications

Introduction

The Aukey PBY37 wireless Bluetooth earbuds are designed to provide you with a convenient and hassle-free listening experience. With their sleek design, long battery life, and easy pairing, these earbuds are perfect for music lovers on-the-go.

Package Contents

Aukey PBY37 wireless Bluetooth earbuds
Charging case
USB-C charging cable
Quick start guide
Ear tips (S, M, L)

Design and Features

The Aukey PBY37 earbuds feature:

Wireless Bluetooth 5.0 connectivity
Up to 8 hours of playback time
Compact and lightweight design
Touch controls for music playback and calls
IPX4 water-resistant

Charging the Earbuds

Place the earbuds in the charging case.
Connect the charging case to a power source using the USB-C charging cable.
The LED indicators on the earbuds will turn red while charging.
The LED indicators will turn blue when the earbuds are fully charged.

Pairing the Earbuds

Remove the earbuds from the charging case.
The earbuds will automatically turn on and enter pairing mode.
Enable Bluetooth on your device and search for "Aukey PBY37".
Select "Aukey PBY37" to pair the earbuds with your device.

Using the Earbuds

Play/Pause music: Tap the earbud once
Skip tracks: Double-tap the earbud
Answer/end calls: Tap the earbud once
Volume control: Triple-tap the earbud

Troubleshooting

Earbuds not pairing: Restart the earbuds and try pairing again.
Earbuds not charging: Check the charging case and USB-C cable for damage.

Specifications

Bluetooth version: 5.0
Battery life: Up to 8 hours
Charging time: 2 hours
Weight: 4g (earbuds) / 25g (charging case)

Aukey PB-Y37 is a 20,000mAh portable charger designed for high-speed charging, featuring a maximum output of

. This makes it capable of powering demanding devices like MacBook Pros, Nintendo Switches, and iPads. AUKEY Malaysia 1. Key Specifications 20,000mAh / 74Wh USB-C Input: 5–20V (45W Max) USB-C Output 1 (PD 3.0): 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 3.25A (65W Max) USB-C Output 2 (PD 3.0): 15V 3A, 3V 2A, 12V 1.5A (18W Max) USB Output (Quick Charge 3.0): 5–6V 3A, 6–9V 2A, 9–12V 1.5A (18W Max) Total Weight: AUKEY Malaysia 2. Operation Guide Charging the Power Bank:

Connect a USB-C cable to the input port and a wall charger. For the fastest recharge (45W), use a high-wattage PD charger.

The LED indicators typically blink during charging and stay solid when the unit is at 100%. Charging Your Devices: Connect your device to one of the output ports.

If the power bank does not start charging automatically, press the Power Button once to initiate the power flow. Low-Current Charging Mode: (Common in Aukey PB-Y series)

Designed for low-power devices like fitness trackers or Bluetooth earbuds. Aukey PB-Y37 is a 20,000mAh portable power bank

To activate, usually press and hold the power button for 2 seconds. The LED indicator should change color or pattern to indicate this mode. AUKEY Official 3. Safety & Care Aviation Compliance:

The 74Wh rating is below the 100Wh international limit, making it safe for air travel. Maintenance:

Recharge the battery at least once every 3 months if not in use to maintain cell health. Environment: Keep the device away from extreme heat and liquids. Pass-through Charging: It is generally recommended

The AUKEY PB-Y37 20,000mAh 65W PD Power Bank manual is more than just a setup guide; it is a roadmap to one of the most versatile high-capacity chargers currently available. Known for its sleek, "plane-friendly" design, this model is a favorite for travelers and tech enthusiasts who need to power everything from a MacBook Pro to a pair of earbuds. Key Takeaways from the Manual

The manual outlines several critical features that define the user experience:

Massive 65W Output: The AUKEY PB-Y37 delivers enough power to fast-charge high-demand electronics like a MacBook Pro 13", Nintendo Switch, or an iPad.

Rapid Recharging: While 20,000mAh batteries often take all night to charge, the manual highlights that this unit can hit 100% in just 2 hours when using a 45W PD input.

Low Current Mode: A standout feature for modern users, this dedicated mode safely charges low-power devices like fitness trackers and wireless headphones that standard power banks might ignore.

Quick Charge 3.0 Support: Includes a port capable of charging compatible devices up to 4 times faster than conventional methods. Safety & Care Instructions

The manual emphasizes "Comprehensive Protection," which includes:

Built-in Safeguards: Protections against overcurrent, overheating, and short circuits.

Maintenance Tips: To preserve battery health, users are advised to recharge the unit at least once every 3 months and keep it away from extreme heat. Manufacturer Information

Aukey is a major Chinese electronics manufacturer recognized for its early adoption of Gallium Nitride (GaN) technology. Their products are certified to meet IEC Safety Standards, providing peace of mind for those carrying high-capacity batteries on flights. AUKEY 10000 mAh Powerbank - 18W PD & QuickCharge 3.0

Charging the Power Bank (Input)

Connect the supplied USB-A to USB-C cable (or any high-quality USB-C cable) to a USB wall charger (5V/2.4A or 9V/2A) .
Plug the USB-C end into the USB-C port of the PB-Y37.
The digital display will light up and blink the current percentage. When it reaches 100 and stops blinking, the device is fully charged.
- Note: Using a 9V/2A (18W) PD charger will fully recharge the 20,000mAh bank in approximately 5.5 hours.

Part 8: Is the PBY37 still relevant? (Manual vs. Modern Power Banks)

If you are searching for the Aukey PBY37 manual because you are considering buying this model (perhaps used or old stock), here is the reality check.

Pros:

Huge 20,000mAh capacity (6-7 full iPhone charges).
Two inputs (Micro-USB & USB-C) – great for cable compatibility.
Durable plastic shell.
Low-current mode for wearables.

Cons:

No fast charging (No Qualcomm Quick Charge, No Power Delivery (PD)). It outputs only 5V.
USB-C is input only (can’t charge newer USB-C laptops or iPhones with a C-to-C cable).
5-7 hour recharge time is slow by 2025-2026 standards.

Verdict: The PBY37 is a solid "slow and steady" emergency battery. If you need speed, buy a newer model. If you need a reliable, simple backup for travel, the PBY37 is great.

🔋 Charging the PB-Y37

Use a USB-C to USB-C or USB-A to USB-C cable.
Input power: likely 5V/3A, 9V/2A (supports 18W fast charging input).
Fully charges in 4–6 hours depending on charger.

✅ Best ways to find the Aukey PB-Y37 manual

Power bank won’t charge (stuck at 0%)

Use a wall charger (not a computer USB port). Computer ports provide only 0.5A, insufficient for 20,000mAh.
Allow 10+ minutes; extremely flat batteries may show 0% for a while before climbing.

Problem 5: I forgot my password? (No)

Fix: There is no password. You are probably looking at a different manual. Just press the button.