Since optical drive firmware updates are sensitive and rare for standard internal DVD writers, official firmware for the ASUS DRW-24D5MT
is typically released only to fix specific compatibility or read/write errors. Quick Guide to ASUS DRW-24D5MT Firmware The most reliable source for firmware updates is the ASUS Official Support Page
. Note that if the "BIOS & FIRMWARE" tab is empty after selecting your Operating System, ASUS has not issued a mandatory public update for that version. Pre-Update Checklist Identify Current Version Device Manager , find your drive under "DVD/CD-ROM drives," right-click Properties Hardware Ids
. The version number (e.g., 1.00 or 2.00) will follow the model name. Remove Media : Ensure no disc is in the tray before starting the update. Power Stability asus drw 24d5mt firmware update
: Do not restart or power off your PC during the flash process, as this can permanently "brick" the drive. Update Procedure : Obtain the latest firmware executable (usually a file) from the ASUS Support Center Run as Admin : Right-click the update utility and select Run as Administrator Select Drive
: The utility should automatically detect your DRW-24D5MT. If you have multiple drives, ensure the correct one is selected. . The tray may lock, and a progress bar will appear.
: Once the "Success" message appears, restart your computer to finalize the installation. Troubleshooting Drive Not Detected : Ensure the SATA and power cables are firmly connected. Firmware Not Found Since optical drive firmware updates are sensitive and
: If the official site lists no firmware, your drive likely has the latest factory version, or the issue may be related to Windows Drivers rather than firmware. Are you experiencing a specific error (like "Disc Not Recognized") that is prompting this update? DRW-24D5MT - Support - ASUS
Cause: Power fluctuation or bad SATA cable. Solution: Do not restart immediately. The drive may be in recovery mode. Download the firmware updater again, restart your PC, and re-run the utility. If it fails again, replace the SATA cable.
After rebooting, confirm that the update succeeded. Problem 2: Update Fails at 50% (Write Error)
Once verification reaches 100%, the utility will display “Update Successful.” It may automatically close, or you may need to click Finish. Reboot your computer immediately.
Before proceeding, understand this:
Firmware updating an optical drive carries a small but real risk of bricking the device if interrupted (power loss, system crash). Do not attempt during a thunderstorm or on unstable power.
Occasionally, an update unlocks support for newer disc types (like DVD+RW with higher reliability) or improves reading speed for scratched discs.