Asmaco Spray Paint Msds Pdf 213 ❲2026 Update❳

Understanding Safety: A Guide to the Asmaco Spray Paint MSDS (PDF 213)

Whether you are a professional contractor or a DIY enthusiast, safety should always come first. When working with high-performance products like Asmaco Aerosol Spray Paint Go to product viewer dialog for this item.

, understanding the technical safety details is essential for protecting your health and your workspace.

The Material Safety Data Sheet (MSDS), specifically document PDF 213, provides comprehensive data on chemical composition, hazards, and emergency protocols. Below is a breakdown of what you need to know from the Asmaco Spray Paint MSDS. Key Hazard Identifications

Asmaco spray paint is classified as an Extremely Flammable Aerosol.

Flammability: The product contains pressurized gas that may explode if heated above 50°C (122°F).

Inhalation Risks: Vapors can cause drowsiness, dizziness, and respiratory irritation.

Physical Contact: Repeated exposure may lead to skin dryness, cracking, or serious eye irritation. Essential Handling & Storage Tips

To maintain a safe environment, follow these manufacturer-recommended practices:

Ventilation: Use only outdoors or in well-ventilated areas to prevent the buildup of harmful vapors.

Ignition Sources: Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke while using the product.

Storage: Store containers in a cool, dry, and well-ventilated place. Keep them upright and out of direct sunlight.

Disposal: Never puncture or incinerate the aerosol can, even after use. First Aid Measures

If an accident occurs, the MSDS outlines immediate steps to take:

Inhalation: Move the affected person to fresh air and keep them comfortable for breathing. Seek medical attention if they feel unwell.

Skin Contact: Wash immediately with plenty of soap and water.

Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and continue rinsing. asmaco spray paint msds pdf 213

Ingestion: Do not induce vomiting. Contact a poison control center or doctor immediately. Why the MSDS Matters

Accessing the Asmaco MSDS ensures you are compliant with industrial hygiene standards and prepared for any spill or exposure. For more technical specifications, including drying times and solid content, refer to the Asmaco Product Data Sheet. MATERIAL SAFETY DATA SHEET - Anchor Allied USA

The following report details the safety and technical specifications for Asmaco Spray Paint, a product manufactured by Anchor Allied Factory Ltd. Product Overview

Asmaco Spray Paint is a quick-drying, acrylic-based aerosol designed for both interior and exterior applications. It is commonly used on wood, metal, plastic, and automotive equipment. Safety Hazards & Identification

Based on available Safety Data Sheets (SDS), the product is classified as follows:

Flammability: Extremely flammable aerosol; the pressurized container may burst if heated. Health Risks:

Inhalation: May cause drowsiness, dizziness (narcotic effects), or respiratory irritation.

Eyes: Causes serious eye irritation, including redness and tearing.

Skin: Causes skin irritation; repeated exposure may cause dryness or cracking.

Toxicity: Contains hazardous solvents such as Acetone, Xylene, and Butanone. Technical Specifications Appearance Colored liquid in aerosol can Flash Point Approximately Drying Time Surface dry in under 30 minutes; Hard dry in 1 hour minimum VOC Content Storage Temperature Keep below 50∘C50 raised to the composed with power C to prevent explosion Shelf Life 3 years under normal conditions Handling & Protective Measures

Latex and Other Paint - Department of Toxic Substances Control - CA.gov

Understanding the Asmaco Spray Paint MSDS (Material Safety Data Sheet) is essential for anyone using these acrylic-based paints in industrial or home settings. This document provides critical details on chemical composition, hazard identification, and emergency response procedures to ensure safe handling. 1. Product Identification and Overview Asmaco Spray Paint

, manufactured by Anchor Allied Factory Ltd., is a quick-drying acrylic paint suitable for both interior and exterior surfaces, including wood, metal, and plastic. It is characterized by: Physical Form: Colored liquid in a pressurized aerosol can. Flash Point: Approximately , making it highly flammable.

Safety Profile: The formulation is CFC-free and weather-resistant. 2. Chemical Composition and Hazardous Ingredients

The safety data sheet identifies several solvents and propellants that contribute to its performance and its hazard profile:

Acetone (30–60%): A primary solvent that can cause eye irritation and drowsiness. Understanding Safety: A Guide to the Asmaco Spray

Butane/Propane Blend (5–10%): Flammable gases used as propellants.

Toluene (5–10%): Linked to potential respiratory and skin irritation.

Xylene (1–5%): May cause harm if inhaled or in contact with skin. 3. Hazard Identification

According to the Globally Harmonized System (GHS), Asmaco Spray Paint is classified under several hazard categories:

Extremely Flammable Aerosol: The pressurized container may burst if heated.

Specific Target Organ Toxicity: Prolonged inhalation of vapors may cause dizziness, headaches, or nausea.

Irritation: Can cause moderate eye irritation and mild skin irritation upon prolonged contact. 4. Essential First Aid Measures

In case of accidental exposure, the following steps are recommended by the Material Safety Data Sheet:

Inhalation: Immediately move the affected person to fresh air. Seek medical help if symptoms like dizziness or breathing difficulty persist.

Eye Contact: Flush eyes with large quantities of water for at least 15 minutes and consult a specialist.

Skin Contact: Wash thoroughly with soap and water; remove any contaminated clothing.

Ingestion: Do not induce vomiting, as this can cause chemical pneumonia. Seek immediate medical attention. 5. Safe Handling and Storage To prevent accidents, follow these Safety Procedures: Safety Data Sheet - Chase Products Co.

Decoding "PDF 213"

In the context of industrial chemical documentation, numbers like "213" typically refer to a specific:

• Product Code or Shade: Asmaco produces a wide variety of spray paints (from primers to topcoats in various colors). The number 213 likely designates a specific color shade, a specific batch series, or a specific product variant (e.g., a particular industrial primer or gloss finish).
• Document ID: Sometimes, manufacturers assign unique ID numbers to their PDF documents to differentiate between revisions.

Important Note: Because "213" identifies a specific variant, it is crucial not to use a generic Asmaco MSDS. Different colors and paint types contain different chemical pigments and solvents, which can change the toxicity and flammability risks.

SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS

3.2 Mixtures

• Zinc Chromate: 10 - 30% (Carcinogenic Category 1B).
• Butyl Acetate: 10 - 20% (Flammable Liquid).
• Xylene: 10 - 20% (Flammable Liquid).
• Propane/Butane (Propellant): 20 - 40% (Extremely Flammable Gas).

(Note: Exact percentages are often withheld as trade secrets; ranges are provided above for drafting purposes.) Decoding "PDF 213" In the context of industrial

Practical, prescriptive safety controls

Engineering and work-practice controls

• Use outdoors or in a well‑ventilated spray booth/local exhaust. If indoors, supply cross‑ventilation and use blower fans to keep vapors below recommended exposure limits.
• Avoid spray in confined, unventilated spaces.
• Anchor to a grounded work area when using large volumes near potential ignition sources.

Personal protective equipment (minimum)

• Respiratory: NIOSH‑approved organic vapor respirator or supplied‑air if ventilation is inadequate. For short, light use outdoors none may be required; assume respirator needed unless ventilation certified adequate.
• Eyes: chemical splash goggles.
• Skin: nitrile or other solvent‑resistant gloves; long sleeves to avoid repeated skin contact.
• Clothing: protective coveralls if frequent use.

Safe handling

• Shake can per label. Spray 25–30 cm from surface, use multiple thin coats.
• Eliminate ignition sources (no smoking, sparks, hot surfaces). Remove static hazards.
• Do not inhale spray; avoid direct contact.
• Do not spray near open flames, pilot lights, or hot surfaces.

Storage & transport

• Store upright, cool (<50°C/122°F), out of direct sunlight. Keep away from oxidizers, acids and heat.
• Do not puncture or incinerate empty cans—even empty cans may explode if heated.
• Follow transport rules: label as flammable aerosol, use approved packaging, and observe quantity limits for air/ground transport.

Spills & disposal

• Evacuate and ventilate area. Absorb small spills with inert absorbent (vermiculite, sand). Place in suitable containers for hazardous waste disposal.
• Do not discharge into drains or waterways.
• Dispose of partially full or empty cans at hazardous waste collection points—do not throw in general trash where local laws prohibit it.

First aid (concise actions)

• Inhalation: move to fresh air; keep warm and rested; get medical attention if symptoms persist.
• Eye contact: rinse with water for 15 minutes; seek medical attention if irritation continues.
• Skin contact: remove contaminated clothing and wash skin with soap and water; seek care for persistent irritation.
• Ingestion: do not induce vomiting; seek immediate medical help.

Fire response quick actions

• Small fires: CO2, dry chemical or foam extinguishers.
• Larger fires: fight from protected position; wear self‑contained breathing apparatus (SCBA) and full turnout gear. Cool adjacent containers with water spray.
• Evacuate area and keep personnel upwind.

SECTION 12: ECOLOGICAL INFORMATION

• Toxic to aquatic life with long-lasting effects. Do not allow to enter waterways.

SECTION 6: ACCIDENTAL RELEASE MEASURES

6.1 Personal Precautions

• Evacuate personnel to safe areas. Ensure adequate ventilation. Remove all sources of ignition.

6.2 Environmental Precautions

• Prevent further leakage or spillage if safe to do so. Do not let product enter drains or water courses.

6.3 Clean-up Methods

• Absorb with inert material (sand, earth, vermiculite) and place in a suitable container for disposal according to local regulations.

Legal Implications of Failing to Maintain MSDS PDF 213

Under OSHA’s Hazard Communication Standard (29 CFR 1910.1200), employers must maintain an accessible copy of the MSDS for every hazardous chemical. Failure to produce the ASMACO spray paint MSDS PDF 213 during an inspection can result in:

• Fines up to $13,653 per violation (USD)
• Willful violations up to $136,532
• Civil lawsuits in case of employee poisoning or fire injury

In the EU, similar penalties under CLP Regulation (EC) No 1272/2008 apply.

SECTION 5: FIRE-FIGHTING MEASURES

5.1 Extinguishing Media

• Suitable: Dry chemical powder, Carbon Dioxide (CO2), Alcohol-resistant foam.
• Unsuitable: Do not use a solid water stream as it may scatter and spread the fire.

5.2 Special Hazards

• Fire will produce dense black smoke containing hazardous combustion products (Carbon oxides, Metal oxides). Aerosol containers may explode when heated.

5.3 Advice for Firefighters

• Use self-contained breathing apparatus (SCBA).
• Cool containers / tanks with water spray.

SECTION 13: DISPOSAL CONSIDERATIONS

• Dispose of contents/container in accordance with local regulations. Do not burn, even after use. Empty containers may retain hazardous residue.