• Register Login
• Home
• Gapps
• About
• Membership Plans

Amsamotion Usb-cn226 Driver Download !!exclusive!! -

Here’s a draft text you can use for a guide or support page to download the driver for the AMSAMOTION USB-CN226 (likely a USB to RS232/RS485 converter or similar serial adapter).

14. Log collection checklist to assist support

• OS version and build.
• VID and PID.
• Exact driver filename and version.
• dmesg output (Linux) or Device Manager screenshots and Event Viewer logs (Windows).
• Steps performed, with timestamps.

Error 1: Code 10 – “This device cannot start”

Cause: Prolific driver version mismatch (especially with counterfeit chips).

Solution:

• Uninstall the current driver from Device Manager (right-click > Uninstall device > tick “Delete driver software”).
• Download Prolific Driver v3.3.2 (For Windows 7/8/10). You can find this on archive sites (verify SHA hashes).
• Manually install via “Have Disk” method.
• For Windows 11: Use the CH340 version or consider a different adapter.

15. Legal and safety notes

• Only install drivers from trusted sources to avoid malware.
• Follow export/compliance rules for device use in regulated environments.

1. Identify the Exact Chipset (Crucial Step)

The Amsamotion USB-CN226 is a generic adapter name. Windows/macOS/Linux drivers depend on the internal chipset, not the brand name.

How to identify:

• On Windows (Device Manager)
  Plug in the adapter → Open Device Manager → Expand Network adapters → Look for something like:
  • Realtek USB GbE Family Controller (RTL8153)
  • ASIX AX88179 USB 3.0 to Gigabit Ethernet
  • Lenovo USB Ethernet Adapter (generic)
• On Linux/macOS
  Run lsusb in terminal. You’ll see something like:
  Bus 001 Device 005: ID 0bda:8153 Realtek Semiconductor Corp.
  (0bda=Realtek, 8153=RTL8153)

✅ Most common chipset for this model: Realtek RTL8153 – start there.

Step 4: Configure GX Works / GX Developer

1. Open your Mitsubishi programming software.
2. Go to Connection Destination > Connection Setup.
3. Select USB Connection.
4. Ensure the correct COM port is selected (usually the one identified in Device Manager).
5. Click Communications Test to verify the connection is successful.

2. Driver purpose and types

• Purpose: Provide an OS-level serial/communication interface so applications can access the device over a virtual COM port (Windows) or ttyUSB/ttyACM (Linux/macOS).
• Driver types:
  • Vendor-supplied proprietary driver (signed installers for Windows).
  • Generic drivers (e.g., USB CDC ACM for class-compliant devices).
  • Chipset-specific drivers (e.g., FTDI, Prolific, CH340/CH341 families) if the device uses a common USB-to-UART chip.
• Action: Determine whether the device is class-compliant or uses a known chipset; if class-compliant, the built-in OS driver may suffice.

AMSAMOTION USB-CN226 Driver Download & Installation Guide

The AMSAMOTION USB-CN226 is a popular, cost-effective USB-to-USB programming cable designed specifically for Mitsubishi PLCs (Programmable Logic Controllers). It acts as a direct replacement for the proprietary Mitsubishi USB cables (such as the QC30R2 or QJ71UC96 equivalents for USB connection), allowing engineers to program and monitor Mitsubishi Q, FX, and L series PLCs via a standard USB port. amsamotion usb-cn226 driver download

If you have purchased this cable and your computer is not recognizing the device, or the programming software (GX Works2/GX Developer) cannot find the PLC, you likely need to install the specific driver.

Below is the driver download link and a step-by-step installation guide. Here’s a draft text you can use for