Place an Order
Place an Order

Alcor+mp+200717+install May 2026

Alcor MP 200717 (Mass Production) tool is a specialized utility used for repairing, formatting, and restoring USB flash drives that use Alcor Micro controllers. It is a "low-level" tool, meaning it interacts with the hardware's firmware rather than just the file system. Purpose and Function

This specific version (released July 17, 2020) is often sought by users dealing with corrupted USB drives that show errors like "Disk is Write Protected" or "Please Insert Disk." It allows a user to "re-flash" the controller, essentially resetting the drive to its factory state. It can also be used to create partitions, such as making a USB drive appear as a CD-ROM (ISO) or a secure hidden volume. The Installation and Setup Process

Unlike standard consumer software, Alcor MP does not typically use a traditional "Setup.exe" installer. Instead, it is distributed as a portable folder. Preparation:

Users must first identify if their drive actually uses an Alcor controller using a tool like ChipGenius

. If the "Controller Vendor" isn't Alcor, this software will not work. Launching: The program is usually started via AlcorMP.exe

. On modern versions of Windows, it is crucial to run it as an Administrator Driver Loading:

Upon opening, the tool may temporarily replace the standard Windows USB mass storage driver with a proprietary Alcor driver to gain low-level access. This is why the mouse or other USB devices might flicker during startup. Configuration:

The "Setup" button within the app allows users to define the flash memory type, optimize for capacity or speed, and set the file system (FAT32 or NTFS). Risks and Technical Hazards

Using Alcor MP is a high-risk operation. Because it writes directly to the firmware, selecting the wrong settings or losing power during the process can "brick" the device permanently. It is generally considered a tool of last resort for hardware recovery.

Installing Alcor MP 200717: A Step-by-Step Guide

Are you looking to install Alcor MP 200717 on your device? Look no further! This article provides a comprehensive guide to help you through the installation process. Alcor MP 200717 is a popular tool used for various purposes, and its installation can seem daunting, especially for those who are new to it. However, with this guide, you'll be able to install it with ease.

What is Alcor MP 200717?

Before we dive into the installation process, let's first understand what Alcor MP 200717 is. Alcor MP 200717 is a software tool used for MP (Mass Production) mode, which is a feature that allows users to flash and configure their devices. It's commonly used for updating firmware, configuring device settings, and troubleshooting issues.

System Requirements

Before installing Alcor MP 200717, ensure your device meets the system requirements:

  • Operating System: Windows 7 or later (32-bit or 64-bit)
  • Processor: Intel Core 2 Duo or equivalent
  • RAM: 2 GB or more
  • Free Disk Space: 500 MB or more

Downloading Alcor MP 200717

To install Alcor MP 200717, you need to download the software first. You can download it from the official website or other reliable sources. Make sure to download the correct version compatible with your device.

Installation Steps

Now that you have downloaded Alcor MP 200717, follow these step-by-step installation instructions:

  1. Extract the Downloaded File: Extract the downloaded file to a folder on your computer. You can use a file extraction tool like WinRAR or 7-Zip to extract the file.
  2. Run the Installer: Navigate to the extracted folder and run the installer file (usually named "setup.exe" or "Alcor MP 200717.exe").
  3. Follow the Installation Wizard: The installation wizard will guide you through the installation process. Follow the on-screen instructions to proceed.
  4. Select the Installation Location: Choose the installation location for Alcor MP 200717. You can select a different location if you prefer.
  5. Choose the Components: Select the components you want to install. You can choose to install all components or select specific ones.
  6. Install the Software: Click "Install" to begin the installation process. The software will be installed on your device.
  7. Complete the Installation: Once the installation is complete, click "Finish" to exit the installation wizard.

Configuring Alcor MP 200717

After installation, you need to configure Alcor MP 200717 to work with your device. Here are the steps:

  1. Launch Alcor MP 200717: Launch the software by double-clicking on the desktop shortcut or navigating to the installation folder.
  2. Select the Device: Select your device from the list of available devices.
  3. Configure the Settings: Configure the settings according to your requirements. You can adjust settings such as baud rate, data bits, and parity.

Troubleshooting Common Issues

During installation or configuration, you may encounter issues. Here are some common issues and their solutions:

  • Installation Failed: If the installation fails, ensure you have administrative privileges and that your device meets the system requirements.
  • Device Not Detected: If your device is not detected, ensure it is properly connected and that the drivers are installed.

Conclusion

Installing Alcor MP 200717 is a straightforward process that requires attention to detail. By following this guide, you should be able to install and configure Alcor MP 200717 on your device. If you encounter any issues, refer to the troubleshooting section or seek help from the official support channels.

Frequently Asked Questions

Q: What is Alcor MP 200717 used for? A: Alcor MP 200717 is used for MP mode, which allows users to flash and configure their devices.

Q: Is Alcor MP 200717 compatible with my device? A: Check the system requirements and device compatibility list to ensure Alcor MP 200717 is compatible with your device.

Q: How do I troubleshoot installation issues? A: Refer to the troubleshooting section or seek help from the official support channels.

By following this guide, you should be able to successfully install and use Alcor MP 200717 on your device.

Identify Your Chipset: This software only works with Alcor Micro controllers (e.g., AU6989, AU6998). You can verify your chipset using a tool like ChipGenius or Flash Drive Information Extractor.

Operating System: It is highly recommended to run this on Windows 7 or Windows XP. It may struggle with driver signing on Windows 10/11 unless "Disable Driver Signature Enforcement" is active. Backup: Formatting will erase all data on the USB drive. Installation & Setup Guide 1. Preparation

Extract the Software: AlcorMP is usually distributed as a .zip or .rar archive. Extract the folder to your desktop.

Run as Administrator: Right-click AlcorMP.exe (or Load.exe) and select Run as Administrator.

Driver Installation: Upon first launch, the program may prompt you to install a specialized Alcor bus driver. Allow this, as it enables the software to communicate directly with the USB controller. 2. Configuration (Setup)

Insert USB Drive: Plug in the faulty flash drive. If the software recognizes it, a status box will turn colored (usually yellow or green) and display the flash chip type.

Access Settings: Click the Setup (S) button on the right. If prompted for a password, try leaving it blank or entering 0000.

Flash Type Tab: Usually, "Auto Detect" is best. If the software fails to identify the flash memory, you may need to manually select the matching Part Number found via ChipGenius. Mode Tab: Set to Product Mode for a standard repair.

Set Scan Level to "High Level Format" for a quick fix, or "Low Level Format" for deep hardware errors.

Information Tab: Here you can customize the VID/PID (Vendor and Product ID), though it is safer to leave these as default unless you are creating a specific bootable partition. 3. Execution Click OK to save settings and return to the main screen. Click the Start (A) button to begin the formatting process.

Wait: Do not unplug the drive. The status bar will show "Scanning," "Erasing," and finally "Complete."

Result: If the box turns green, the drive is repaired. If it turns red, an error code (e.g., "30500: No support flash error") will appear, indicating either a hardware failure or the wrong software version. Troubleshooting Common Issues

"Hub not supported": Avoid using USB hubs or front-panel ports. Plug the drive directly into a motherboard port on the back of the PC. alcor+mp+200717+install

"Device not found": Close the program, unplug the drive, restart the program, and plug the drive back in. Ensure no other USB mass storage devices are connected.

Write Protection: If the tool says the drive is write-protected during the process, ensure you have disabled any antivirus software, as they often block low-level formatting tools.

Recovering Your Flash Drive: A Guide to Alcor MP 20.07.17 If you’ve ever plugged in a USB flash drive only to find it labeled as "Read Only," "Disk Write Protected," or simply not showing up in Windows Explorer, you’ve likely encountered a firmware corruption issue. For drives using Alcor Micro controllers, the Alcor MP (Mass Production) Tool is the go-to "resurrection" software.

Specifically, the Alcor MP 20.07.17 version is a stable, widely used release designed to service AU6989, AU6918, and other common Alcor chips. Here is everything you need to know about installing and using it safely. What is Alcor MP 20.07.17?

The Alcor MP tool is a low-level formatting utility used by manufacturers to flash firmware onto USB controllers. Unlike a standard Windows format, this tool communicates directly with the controller chip to: Reset a "Write Protected" status. Repair "No Media" or "Please Insert Disk" errors. Restore the original factory capacity of a drive. Fix "0MB" size reporting. Prerequisites Before Installation

Identify Your Chip: This tool only works for Alcor controllers. Download a utility like ChipGenius or Flash Drive Information Extractor first. If your controller vendor isn't "Alcor Micro," this software will not work.

Backup Data: This process is destructive. It performs a low-level format that will wipe every byte of data on the drive.

Disable Antivirus: Because these tools interact with hardware at a low level, Windows Defender or other antivirus programs may flag them as "False Positives." You will likely need to temporarily disable your real-time protection. How to Install and Run Alcor MP 20.07.17

The "installation" for Alcor MP is usually portable, meaning you don't run a standard Windows installer, but rather execute the files from a folder. Step 1: Extraction

Download the archive (usually a .rar or .zip) and extract it to a folder on your desktop. Avoid running it directly from the zipped folder to prevent read/write errors. Step 2: Launch the Executable

Open the folder and look for an application file named AlcorMP.exe or LoadDriver.exe.

Pro Tip: Right-click the .exe and select Run as Administrator. This ensures the tool has the permissions required to modify USB drivers. Step 3: Connect Your Drive

Plug in the faulty USB drive. The tool should automatically detect it in one of the numbered boxes (e.g., "G:" or "H:"). If it doesn't appear, click the Refresh (G) button. Step 4: Configuration (Setup)

Click on the Setup (S) button. If it asks for a password, just leave it blank and hit Enter.

Flash Type: Set this to "Auto" unless you know your specific NAND type.

Optimize: Choose "Speed Optimize" for performance or "Capacity Optimize" if the drive has many bad blocks.

Scan Mode: "Low Level Format" is best for repairing corrupted drives. Step 5: Start the Process

Once configured, click Start (A). A progress bar will appear. Do not unplug the drive or shut down your computer during this phase. If the bar turns green, the repair was successful. If it turns red, an error code will be displayed for further troubleshooting. Troubleshooting Common Errors

"30500: No support flash error": This means your specific flash chip isn't in the database for this version. You may need a newer or older version of the Alcor MP tool.

"Hub configuration changed": This usually happens if you are using a USB 3.0 port or an external hub. For best results, plug the drive directly into a USB 2.0 port on the back of your PC's motherboard.

Tool won't open: Ensure you have installed the "Alcor Micro USB Card Reader" drivers if they were included in the download package. Conclusion Alcor MP 200717 (Mass Production) tool is a

Alcor MP 20.07.17 is a powerful "last resort" for bricked flash drives. While the interface looks dated, it provides a level of control that standard OS tools simply cannot match. If your Alcor-based drive is acting up, this specific build is a reliable place to start your recovery efforts. AI responses may include mistakes. Learn more

Based on the keywords provided, this write-up focuses on a specific, somewhat historical firmware modification scenario often encountered in radio control (R/C) hobbies, specifically involving FlySky transmitters and the Multi-Protocol firmware project.

Here is a detailed write-up regarding the topic.

Phase B: Configuration (Setup)

  1. Open Alcor MP Tool (v200717).
  2. Click the "Setup" or "Config" button (usually represented by a Gear icon).
  3. Navigate to the "Flash Setting" or "Flash ID" tab.
  4. If the tool detects your drive, you will see the Flash ID listed.
  5. Crucial Step: Ensure the "Partition Type" is set to "Public" (or "User Mode") if you just want to repair the drive to normal usage.
  6. Click "Save" or "OK" to return to the main screen.

Preparation for Installation

  1. Check Requirements: Before installing Alcor, ensure your system meets the necessary requirements. This includes checking the operating system version, hardware specifications, and any dependencies required by Alcor.

  2. Gather Information: Look for the latest installation guide for Alcor, specifically for the version you're interested in (e.g., related to 200717). This could be on the official website, forums, or documentation repositories.

  3. Understand MP Integration: If MP (e.g., MediaPortal) is involved, understand how it integrates with Alcor. This could mean checking if there are specific instructions for installing Alcor with MP.

Step 2: Flashing the Firmware

The firmware file (usually a .hex file dated 200717) is loaded into the flashing software.

  • Target Chip: Atmega328p (standard for the Alcor module).
  • Fuses: The Multi

Alcor MP 200717 (often formatted as AlcorMP_20.07.17 or similar) is a Mass Production (MP) tool used to repair and reflash USB flash drives that use Alcor Micro

controllers. These tools are essential for fixing common USB errors like "Write Protected," "No Media," or 0MB capacity. Overview of Alcor MP 200717

The "200717" in the version name typically refers to the release date ( July 17, 2020 ). This specific version is often part of the Alcor U3 MP

series, designed to support specific NAND flash memory chips and AU-series controllers (e.g., AU6989SN-GTC/GTB). Installation and Usage Steps

Mass production tools do not usually "install" in the traditional sense; they are portable applications that must be configured correctly for your specific hardware. Preparation Identify your USB controller and Flash ID using a tool like ChipGenius to ensure compatibility with the 200717 version. It is highly recommended to use a 32-bit Windows OS for better stability with these drivers.

Download the utility (often available from community sites like FlashBoot.ru

Extract the contents to a local folder; avoid paths with non-English characters. Run the main executable (e.g., AlcorMP.exe plugging in your USB drive.

If prompted for a password, it is often blank; simply click "OK". Configuration (Setup) to configure parameters.

Common settings include selecting "Product Mode," "Capacity Optimize," and "Low Level Format" for a full repair. Plug in the drive. Once detected, click to begin the flashing process. : This process performs a low-level format and will erase all data on the drive. Critical Warnings Driver Filter : The tool may install a filter driver ( mpszfilt.sys

). If the program crashes, this driver might remain active and interfere with other USB devices; relaunch and close the tool properly to uninstall it. Risk of Brick

: Using the wrong firmware version or settings can permanently disable the controller. Always verify your matches the tool's supported list. specific USB controller model

to confirm if this version is the correct match for your device?

Phase C: Start (Mass Production)

  1. On the main screen, you should see your USB drive listed in the Port list.
  2. Click the "Start" button.
  3. The tool will begin writing firmware to the controller. The status bar will change to "Updating..." or show percentage progress.
  4. Do not unplug the drive during this process. Wait until the status says "Pass" or "OK".
  5. Unplug and replug the USB drive. It should now be recognized as a new, empty storage device.

Write-Up: Installing Multi-Protocol Firmware on the Alcor Transmitter Module (circa July 2020)

Topic: Alcor + Multi-Protocol (MP) Module Installation Date Reference: 200717 (July 17, 2020) Context: R/C Hobby, Firmware Flashing, Open Source

3. Partition Settings

  • Type: Removable Disk (or Fixed Disk if making a Windows To Go drive – though not recommended).
  • Format: FAT32 or exFAT (Avoid NTFS via MP tool).

Step 1: Download the Correct Driver

Search for Alcor Micro Smart Card Reader Driver 200717 from a trusted source (e.g., your device manufacturer’s support page, or official Alcor Micro partner site).
The package typically includes: Operating System: Windows 7 or later (32-bit or

  • au9540_x64.msi (64-bit)
  • au9540_x86.msi (32-bit)
  • *.inf, *.sys, *.cat files

Do not use generic “driver updater” tools – they often break smart card functionality.

Phase A: Identify the Controller

Before using Alcor MP Tool, you must confirm your drive actually has an Alcor controller.

  1. Download a free tool called ChipGenius.
  2. Insert your USB drive.
  3. Check the "Controller Vendor" and "Controller Part-Number".
    • Example: If it says "Alcor Micro AU6989", you can proceed with this tool.
    • Note: If it says SMI, Phison, or Silicon Motion, this tool will not work.