Para adaptar una fuente de poder de PC (ATX) a una PS4 Fat, necesitas entender que no es simplemente "conectar cables". La PS4 utiliza un conector propietario y una lógica de encendido diferente a la de una PC.
Aquí tienes los pasos y el diagrama para lograrlo correctamente:
To provide a technical overview of the feasibility, methodology, risks, and requirements for replacing the internal power supply of a PlayStation 4 (Fat/CUH-10xx, 11xx, 12xx) with a standard computer ATX power supply unit.
Adapting a PC power supply to a PS4 Fat is not a beginner project. It requires understanding ATX specifications, standby voltage regulation, and transistor logic. But for the dedicated hardware hacker, it’s a rewarding way to resurrect a dead console without buying proprietary parts.
If you follow this guide carefully, double-check every voltage, and prioritize safety, you can give your old PS4 Fat a new life powered by a reliable, cool-running desktop PSU – and maybe even an external on/off switch for the whole rig. adaptar fuente de pc a ps4 fat
Final checklist before power-on:
Good luck, and may your fuses never blow.
Disclaimer: This article is provided as-is. The author assumes no liability for damage to equipment, personal injury, or voided warranties. Always work in a static-safe environment and unplug AC power when soldering.
Adapting a PC ATX power supply (PSU) to a PS4 Fat console is a common modification used to bypass a failing internal power supply. This process requires converting standard PC output voltages ( +12Vpositive 12 cap V +5Vpositive 5 cap V Para adaptar una fuente de poder de PC
) to match the specific pinout and power requirements of the PS4 Fat motherboard. Technical Specifications
The PS4 Fat (Original) requires two primary voltage rails to operate: Main Rail: +12Vpositive 12 cap V
DC, capable of providing at least 18A to 20A (approx. 250W total peak). Standby Rail: +5Vpositive 5 cap V STBY for low-power operation and logic signaling.
Power-On Signal: A control line used by the console to "tell" the PSU to wake up from standby. PIN Configuration (PS4 Fat Connector) Plug ATX into wall (without PS4 connected)
PS4 Fat models typically use either a 4-pin or 5-pin connector for low-voltage signals. Signal Description PC ATX Equivalent +5V STBY Standby Power Purple wire ( +5VSBpositive 5 cap V cap S cap B GND Ground / Common Black wire (GND) ACDC_STBY Power On Control Green wire (PS_ON) GND / NC Ground or No Connect Black wire (GND)
Adaptar una fuente ATX de PC a una PlayStation 4 Fat es una solución técnica para reparar consolas con fuentes internas defectuosas, requiriendo conexiones específicas para 12V (potencia) y 5V (standby). El proceso implica soldar cables de la fuente PC a los pines de entrada de la consola (4 o 5 pines según el modelo) y aislar correctamente las conexiones para evitar cortocircuitos. Vea una guía visual en
Not any PSU will work. Here’s what to look for:
Avoid: "DIY" bench PSUs without proper overcurrent protection. Stick to name brands like Corsair, EVGA, Cooler Master, Seasonic – even old ones.