A Service of ITIPS
Internet Tax Information Processing Services, Inc

Actualizar Firmware Decodificador Cantv Nls3601 Por Usb Extra Quality [repack] Now

Here’s a useful, practical review for the product or guide titled "Actualizar firmware decodificador CANTV NLS3601 por USB extra quality" — written as if from an experienced user, focused on helping others avoid issues and achieve a successful update.

Review Title: Works if you follow exact steps – but “extra quality” is misleading

Rating: ⭐⭐⭐☆☆ (3/5)

I’ve updated several CANTV NLS3601 decoders using the USB method, so here’s my honest take on this “extra quality” firmware file.

What worked well:

What you need to know before buying/downloading: Here’s a useful, practical review for the product

Step-by-step tips for success (not included in the basic guide):

  1. Format USB drive as FAT32, not exFAT or NTFS.
  2. Copy only the update.bin (or similar named file) to the root of the USB.
  3. Turn off decoder, insert USB, then power on while repeatedly pressing OK or MENU (depends on batch) until update screen appears.
  4. Do not turn off power during the update – it takes 5–10 minutes.

Verdict:
Useful if your NLS3601 is already glitchy and official firmware isn’t available. But “extra quality” is just marketing – no picture or sound improvement. For basic stability, it’s fine. For mission-critical use, stick with official firmware from CANTV if you can find it.

Recommended only for:

Not for:

Updating the firmware on a Cantv NLS3601 (Newland) decoder via USB is a technical process typically used to resolve signal issues, recover a "blocked" device, or update the channel list. Technical Prerequisites : Must be formatted to Review Title: Works if you follow exact steps

(other formats like NTFS may not be recognized by the decoder). Firmware File file specific to the NL-S3601 model.

: Do not turn off the device during the process, as this can permanently damage the hardware ("brick" the device). Step-by-Step Update Guide Prepare the USB Drive : Copy the firmware file directly to the of the USB flash drive (do not put it inside any folders). Access the Decoder Menu

Plug the USB drive into the port (usually located on the front or side). button on your remote control. Navigate to System Settings Use the arrow keys to find the Configuración (Setup) Sistema (System) Look for the Actualización de Software (Software Update) Actualizar por USB (USB Upgrade) Execute the Update Select the file from the USB list and press

A progress bar will appear. The decoder will typically show a "blue screen" or status message while processing. Reboot and Factory Reset Once finished, the device should restart automatically. It is highly recommended to perform a Factory Reset

(Restablecer valores de fábrica) after the update to ensure the new firmware runs cleanly. Common Troubleshooting File Not Found : Ensure the file extension is strictly and that it is in the root directory. Service Reactivation The decoder did update successfully from a USB

: If you updated because of "No Signal" after a long period of inactivity, you may also need to re-verify your account or realign your antenna on the official Cantv website Hidden Menu

: For advanced technical adjustments, some users access a hidden menu (usually via a specific numerical code on the remote), though this should be handled with caution. specific 2024 frequency list for re-tuning your channels after the update?

⚠️ Critical Precautions (For Extra Quality)

  1. Never interrupt power during the update – a power outage can permanently damage the decoder.
  2. Do not rename the firmware file unless specified by the manufacturer.
  3. Use only a clean, virus-free USB – preferably empty and freshly formatted.
  4. Match the exact model – firmware for NLS3601R, NLS3601W, or other variants may not be compatible.
  5. Back up your channel list if possible (some updates erase everything).

Mantenimiento Posterior para Mantener la "Extra Quality"

Ya con el nuevo firmware, tu decodificador será más estable. Pero sigue estas buenas prácticas:

6. Final Steps

Paso 2: Reconocimiento del USB

Si todo está correcto, el LED frontal parpadeará rápidamente (naranja o verde). Aparecerá una barra de progreso 0% → 100%. Este proceso toma entre 3 y 7 minutos.

5. Procedimiento paso a paso: Actualizar firmware NLS3601 por USB

Apague el decodificador (desconéctelo de la corriente). Conecte el USB en el puerto trasero (el de color negro o azul, no el frontal que suele ser para media). Siga esta secuencia exacta:

3. Requisitos para la actualización por USB

Antes de comenzar, reúna los siguientes elementos:

| Elemento | Especificación | |----------|----------------| | Decodificador | CANTV NLS3601 (revisa la etiqueta: debe decir "NLS3601", no confundir con NLS2801) | | Memoria USB | Capacidad entre 2GB y 16GB. Formato FAT32. Preferiblemente USB 2.0 (el NLS3601 no reconoce bien USB 3.0) | | Fuente de poder | Estabilizador o UPS (no actualizar con solo el adaptador de corriente directo) | | Archivo de firmware | Formato .bin o .upg obtenido de fuente confiable. Debe pesar ~40MB a 80MB. | | PC con Windows | Para formatear y copiar archivos. |

4.3. Post-actualización

3. Insert the USB