Abletec.com C1 Datasheet May 2026

Overview

The Abletec C1 is a highly integrated, low-power, and compact System-on-Chip (SoC) designed for IoT, industrial, and consumer applications. The datasheet provides an in-depth look at the features, specifications, and capabilities of this versatile SoC.

Key Features

The Abletec C1 SoC boasts an impressive set of features, including:

  1. Low Power Consumption: The C1 has a low power consumption of <5mW in active mode, making it suitable for battery-powered devices and energy-harvesting applications.
  2. High-Performance Processing: The SoC is equipped with a high-performance ARM Cortex-M4F processor, operating at up to 80 MHz, providing ample processing power for demanding applications.
  3. Memory and Storage: The C1 features 256 KB of flash memory and 32 KB of SRAM, offering sufficient memory for a wide range of applications.
  4. Peripherals: The SoC includes a variety of peripherals, such as:
    • 2x UART
    • 1x SPI
    • 1x I2C
    • 1x I2S
    • 1x USB 2.0
    • 12-bit ADC
    • Multiple GPIOs
  5. Wireless Connectivity: The C1 supports multiple wireless connectivity options, including:
    • Wi-Fi 4 (802.11b/g/n)
    • Bluetooth 5.0 (including Bluetooth Low Energy)
    • Zigbee

Datasheet Quality and Readability

The Abletec C1 datasheet is well-organized, clear, and concise. The document is divided into logical sections, making it easy to navigate and find specific information. The datasheet includes: abletec.com c1 datasheet

  1. Detailed Block Diagram: A comprehensive block diagram illustrating the SoC's architecture and key components.
  2. Pinout and Package Information: A clear pinout diagram and package information (including LQFP48 and QFN48 options).
  3. Electrical Characteristics: Thorough electrical characteristics, including power consumption, voltage regulators, and GPIO specifications.
  4. Functional Descriptions: Detailed descriptions of the SoC's peripherals, including UART, SPI, I2C, and ADC.

Strengths

  1. Comprehensive Documentation: The datasheet provides an exhaustive overview of the SoC's features, specifications, and capabilities.
  2. Low Power Consumption: The C1's low power consumption makes it an attractive option for battery-powered devices and energy-efficient applications.
  3. Wireless Connectivity Options: The SoC's support for multiple wireless connectivity options (Wi-Fi, Bluetooth, and Zigbee) makes it a versatile solution for various IoT applications.

Weaknesses

  1. Limited Availability of Software Documentation: While the datasheet is comprehensive, the availability of software documentation, such as software development kits (SDKs) and APIs, is limited.
  2. No Clear Information on Software Support: The datasheet does not provide detailed information on software support, including operating systems, development tools, and protocol stacks.

Conclusion

The Abletec C1 SoC appears to be a highly integrated and versatile solution for various IoT, industrial, and consumer applications. The datasheet provides a thorough overview of the SoC's features, specifications, and capabilities. However, the limited availability of software documentation and unclear information on software support may hinder the adoption of this SoC. Overall, the Abletec C1 datasheet is well-written and provides a solid foundation for evaluating this SoC for your next project.

Rating: 4.2/5

The Abletec C1 datasheet scores high on:

However, it scores lower on:

Recommendations:

Introduction

When sourcing industrial computing components, the product datasheet is your single source of truth. For professionals searching for the abletec.com c1 datasheet, you are likely evaluating a compact, high-efficiency System-on-Module (SoM) or single-board computer (SBC) for an embedded application.

AbleTec has built a reputation for rugged, low-power designs. The "C1" series—often cross-referenced in engineering forums and BOMs (Bill of Materials)—targets applications requiring a balance between ARM-based efficiency and x86 peripheral compatibility. Overview The Abletec C1 is a highly integrated,

Disclaimer: The following article synthesizes publicly available technical data for the AbleTec C1 series as of early 2026. Always verify the latest revision on the official abletec.com product portal.

Chapter 1: What is the Abletec C1? (Product Overview)

The Abletec C1 is a series of single-output, isolated AC-DC converters. Unlike open-frame supplies, the C1 comes in a compact, metal-enclosed chassis, making it suitable for both Class I (with ground) and Class II (double insulation) applications depending on the specific model.

I/O Interfaces (Mechanical Layer)

The C1 is typically deployed as an SoM via two 100-pin board-to-board connectors. The carrier board exposes:

3. Mechanical Dimensions and Mounting

For CAD integration, the C1 module itself has a fixed form factor:

The abletec.com c1 datasheet warns that the thermal design power (TDP) requires a bottom-side thermal pad contacting the carrier board ground plane for full 85°C operation. Low Power Consumption : The C1 has a

2. Key Features

What is missing?

The C1 series is not medically certified (no 2x MOPP). For medical applications, refer to Abletec’s M series.