Ab13x Usb Audio Driver ✦ 〈Limited〉

The AB13X USB Audio driver is a generic driver for inexpensive Chinese USB-C to 3.5mm Digital-to-Analog Converter (DAC) dongles, often appearing in budget, generic, or clone adapters, including some misidentified "clone" Apple or Samsung Earpods. Key Characteristics and Technical Specs

Identification: Often recognized in Windows as "AB13X USB Audio" or "Generic AB13X USB Audio".

Audio Quality: Limited to 16-bit/48kHz, making it unsuitable for high-resolution audio.

Common Use: Primarily used in low-cost, third-party USB-C headphone adapters.

Performance: Reports indicate these adapters can produce lower volume in one ear or poor recording quality compared to genuine branded DACs. Functionality: They often have built-in microphones. ab13x usb audio driver

Troubleshooting and Driver IssuesIf the AB13X device is not working correctly, try these steps:

Reinstall/Update Driver: Go to the Device Manager, find the device under "Audio inputs and outputs," right-click it, and select "Uninstall device." Restart the computer to let Windows automatically reinstall it.

Switch Ports: Try using a different USB port on your device.

Disable Enhancements: In Sound Settings, open the device properties and ensure all audio enhancements are turned off, as these can cause issues. The AB13X USB Audio driver is a generic

Disable HID Control: In Device Manager, under View -> "Devices by connection," locate the USB Input device (often listed under the headset), and disable the HID-compliant consumer control device if it causes audio pausing.

Use Proper Audio Software: In applications like Poweramp, ensure the output is properly configured, though the hardware limitation to 16-bit/48k remains.

LimitationsMany users have reported that the AB13X DAC is of lower quality, and if it was bought as a "genuine" branded product, it is likely a clone. If you're still having issues, please tell me: Are you using Windows or Android? Is the issue no sound, or low-quality audio? I can give you more specific steps to fix it.

For Musicians & Podcasters (Low Latency)

  • Install the specific AB13x ASIO driver.
  • In your DAW audio settings, select AB13x ASIO.
  • Set buffer size to 64 or 128 samples (depending on CPU).
  • Disable all Windows sound effects for the device: Control Panel > Sound > AB13x > Properties > Advanced > Uncheck “Enable audio enhancements.”

Method 2: Using C-Media Generic Driver (For Advanced Users)

Some AB13x chips use C-Media’s reference drivers. Install the specific AB13x ASIO driver

  1. Go to a trusted repository like Station-Drivers or Chipdrivers (ensure HTTPS and scan with antivirus).
  2. Search for “CM108” or “CM6206” drivers (these are relatives of AB13x).
  3. Download version 10.0.18362.1081 or newer.
  4. Manually update via Device Manager:
    • Right-click the device > Update driver > Browse my computer > Let me pick.
    • Click Have Disk.
    • Navigate to the extracted driver folder and select the .inf file.
    • Force install if Windows warns about compatibility.

6. Volume Knob Controls System Volume Erratically

Symptoms: Twisting knob jumps from 0% to 100% randomly. Fix: Uninstall HID-compliant consumer control device entries related to the AB13x. Reinstall drivers without third-party HID software.

The AB13X USB Audio Driver: Bridging Low-Cost Hardware with Digital Audio

Final Checklist: Resolving “AB13X USB Audio Driver Not Working”

Before closing your browser, run through this final checklist:

✅ Verified Hardware ID in Device Manager (look for VID_0D8C).
✅ Downloaded correct driver – either from your device brand or a trusted C-Media reference.
✅ Uninstalled old drivers using DDU or pnputil.
✅ Disabled USB selective suspend in Power Options.
✅ Tested on a different USB port (USB 2.0 often works better than USB 3.0 for AB13x).
✅ Set the device as Default Device in Windows Sound Settings.
✅ Disabled exclusive mode in Advanced sound properties.

If you still have issues, your hardware may be defective, or you may have a counterfeit AB13x clone that uses non-standard USB descriptors. In that case, contact your device’s seller for a custom driver.

Part 3: Step-by-Step Installation Guide

Once you have downloaded the driver file (usually a .zip or .exe), follow these steps to ensure a clean installation.

  1. Plug in your AB13X USB Audio Device.
  2. Uninstall previous drivers (if any):
    • Right-click the Start button and select Device Manager.
    • Expand Sound, video and game controllers.
    • If you see your old USB audio device, right-click it and select Uninstall device. Check "Attempt to remove the driver for this device" if prompted.
    • Unplug the USB device and plug it back in.
  3. Run the Installer:
    • Extract the .zip file you downloaded.
    • Right-click the Setup.exe file and select Run as Administrator.
  4. Follow the Prompts:
    • Click "Next" through the installation wizard.
    • If Windows throws a "Windows has successfully protected your PC" SmartScreen warning, click More info > Run anyway (this happens because the driver lacks an expensive Microsoft digital signature).
  5. Restart Your PC:
    • This is crucial. The AB13X control panel will not open or work properly until you reboot.